sábado, 11 de agosto de 2018

Something Happened to My OpenMandriva Lx OS

Yesterday I booted my laptop with OpenMandriva Lx and went to look for a book.  When I returned to the machine, a kernel panic was waiting for me on the screen.

Apparently, something went very wrong with the updates that I performed last week, but I did not notice.

This has happened before, though.  As the laptop boots seven OSs (OpenMandriva, Mageia, PCLinuxOS, Pisi, Elive, Fedora, and PicarOS), when I install a system that changes the OMV-controlled GRUB2, OpenMandriva gets a panic.

I do not have the expertise to rectify things other than by performing a re-install.  So, I reinstalled OpenMandriva, updated it (the process did not last more than an hour or so) and, sure enough, the OS was bootable again.

I added my favorite programs in a snap and checked that Steam was working. So was InSync.  Everything was OK.

Then, I remembered the all-in one Epson XP-231 printer.

I located the driver and installed it.  After that, as the printing functions are not normally the problem, but the scanner, I went to set up the latter.  As usual, it was not detected, so I added one from the list and that helped the OS find the scanner and configure it properly.  I tested it and it worked.

As I said before, getting the scanner to work has always been the headache, not printing.  However, this time, the printer would spit illegible code instead of the simple line I typed in LO Writer.

Nothing I tried worked.

Suddenly, I remembered how I managed to get the XP-231 to work in Fedora and Elive... The CUPS approach!

I opened CUPS and added the printer from there.  I chose the driver, checked the settings, and asked it to print a test page.

This time, I saw Tux come out from the printer, smiling on the page.

 ********************
If I had remembered before, I could have saved some time.  But, truly, since nothing had failed in so long, I have already started to forget what to do if one of my OSs misbehaves.

I am getting rusty.

Maybe it is time for me to start experimenting with BSD, Haiku, or something.

1 comentario:

And the Magic is Ready!

Two weeks ago, DistroWatch reported that Mageia 9 had been released. Back then, I was swamped with work and, even when the Mageia notifier ...